|
Scrub Truck Spacers
A set of spare spacers for use with the Scrub Trucks
Price: £0.50
|
Size
|
|
|
Scrub Pivot Cups
High-precision nylon Pivot Cups are the essential link between the moving parts of the Skate Truck System.
Although they are hidden away in the inside of the truck, they have a very obvious impact on the overall performance and precision of Trucks.
Because the new nylon material is harder than the traditional urethane material, energy is more directly transfered from your deck to your wheels helping your board go where you want it to go.
Upgrade your old Pivot Cups and enjoy renewed turning precision!!
Price: £1.00
|
|
|
|
Scrub Aluminium Channel Truck Kingpin
The Scrub Kingpins are suitable for the Scrub aluminium channel truck as a replacements for the original, should it be bent or worn out. It will also fit on other model trucks that are similar in design, but will not fit on the MBS Matrix Truck Range.
Buying the Kingpin set is the only way to purchase spare washers as Scrub do not sell these separately.
Set of 2 Kingpins
Price: £5.00
|
|
|
|
Scrub Eggshocks
A simple solution to speed wobble and soft springs.
A worth while addition to any channel truck board!
They come in 3 stiffnesses, depending on your height., weight and aggressivness..... the stiffer they are, the less the board will turn!!
Compatible with Scrub, MBS, Exit, Kheo, BlueEarth, Mongoose, Hyline, Biohazard.
Price: £5.00
|
Hardness
|
|
|
Scrub Skate Truck - Spares Kit
The Scrub Spares Kit for Skate Trucks is a essential bit of kit to keep your board in top condition and replace any screws, bolts, nuts and many other bits that might come loose or get lost over time using the board.
You get a full set of rubbers + pivot cups, 4 binding bolts, 4 T-Nuts, 4 Wheel Nuts + loads of spare deck/truck bolts, screws and nuts.
Many of the components here will fit other makes of board such as Exit, Kheo, BlueEarth, Early model Trampa's etc.
Now comes in two variants for either 12mm skate trucks and newer bindings or 10mm skate trucks and older "pillar" bindings.
Price: £6.50
|
Style Needed?
|
|
|
Scrub Grab Handle
Make those grabs easier
The Scrub Kite Grab Handle is a basic Soft EVA foam handle with a hard plastic insert though the centre to keep the handle in shape.
The handle is great for board off moves and also carrying the board!
Is very grippy even when wet and also soft if unlucky enough to hit it!
Comes with fixings and is flexible enough to fit most land and water boards on the market.
Recommended for all Kiteboarders
Price: £9.95
|
|
|
|
Scrub Standard Springs
These are new springs to refresh and stiffen up your channel truck board and stop the dreaded speed wobble.
If you have springs over a year then you will probably benefit from new set of springs.
They fit MBS, Mongoose, Exit, Scrub, BlueEarth and many other boards that use the channel truck steering system.
Set of 4 Springs
Price: £10.00
|
|
|
|
Scrub 10mm Bearings
These are standard 10mm bearings to fit a mountain board wheel designed for us with a 10mm Axle (Skate Truck)
They fit most boards out there such as MBS, Scrub, Bluearth, Kheo, Ground Industries, Flexifoil and pretty much any others.
Set of 8 Bearings
Please get in touch with us if you have questions about fitting the bearings.
Price: £10.00
|
|
|
|
Scrub 12mm Bearings
These are standard 12mm bearings to fit a mountain board wheel designed for us with a 12mm Axle (Channel Truck / Vectors)
They fit most boards out there such as MBS, Scrub, Exit, noSno, Bluearth, Kheo, Ground Industries, Flexifoil and pretty much any others.
Set of 8 Bearings
Please get in touch with us if you have questions about fitting the bearings.
Price: £10.00
|
|
|
|
Scrub Coil Leash
This is easily attached to the board bindings and the riders leg to prevent any run-away mountainboards.
It is an essential item for any rider, and is a must in order to ride at most centres and competitions.
Basic well made bit of kit that does the job. Fits all makes and models of boards.
Price: £12.00
|
|
|
|
|
Scrub Channel Truck - Spares Kit
The Scrub Spares Kit for Channel Trucks is a essential bit of kit to keep your board in top condition and replace any screws, bolts, nuts and many other bits that might come loose or get lost over time using the board.
You get two springs, set of medium eggs, 4 binding bolts, 4 T-Nuts, 4 Top Hats, 4 Wheel Nuts + loads of spare deck/truck bolts, screws and nuts.
Many of the components here will fit other makes of board such as Exit, Kheo, BlueEarth, Mongoose, Hyline, Biohazard, Old Design Trampa's, Wooden MBS Boards. etc.
Price: £15.00
|
|
|
|
Scrub Board Bag
The Scrub Board Bag is a brilliant addition to any boarder whatever kit you use!!
It has a high quality padded back that opens one side right off to allow the board to slot in effortlessly. The interior has a number of pockets to fit spares and other small items.
The bag has handles to haul it about and also straps so you can put it on your back. It secures the board inside so it can't roll about and folds down to the size of a backpack if you want to ride with it etc.
It also keeps the car clean!!
Price: £35.00
|
|
|
|
Scrub Brake System for 10mm Skate Trucks
Do you feel you need that extra bit of control?
The Scrub Skate Truck Brake is a twin drum brake system that fits onto the Scrub Skate range of boards.
It is designed for 10mm axles and bearings, typical of Skate Trucks.
It comes complete mounted onto a skateboard truck so it is simple to fix onto the board.
The drum brake has a great amount of stopping power even in the wettest conditions.
Most other boards that use a skate truck can use this brake but they do need five spoke wheels to fix the drums to.
If you are not sure please contact us.
This brake will fit most skate trucked mountain boards.
Price: £49.00
|
|
|
|
|
Scrub Brake System for 12mm Skate Trucks
Do you feel you need that extra bit of control?
The Scrub Skate Truck Brake is a twin drum brake system that fits onto the Scrub Skate range of boards.
It is designed for 12mm axles and bearings, not too typical of Skate Trucks.
It comes complete mounted onto a skateboard truck so it is simple to fix onto the board.
The drum brake has a great amount of stopping power even in the wettest conditions.
Most other boards that use a skate truck can use this brake but they do need five spoke wheels to fix the drums to.
If you are not sure please contact us.
Price: £58.00
|
|
|
|
Scrub Brake System for Channel Trucks
The Aluminium Truck Brake is a twin drum brake system that fits onto the Scrub Aluminium Channel Trucks.
It is compatible with boards such as the Furnace Creek. Regolith, Quasar2 and possibly other boards. It comes complete mounted onto a bottom truck hanger so it is simple to fix onto the board.
The drum brake has a great amount of stopping power even in wet conditions.
Most other boards that use an aluminium channel truck can use this brake but they do need five spoke wheels to fix the drums to, you must also check that your current truck has the same drilling pattern on the holes.
If you are not sure please get in touch with us to check that it will fit.
Price: £59.00
|
|
